Detail：

*100% Brand new , High quality,Shiped in 48 hours

*Material: PP,PA(Rods), Nylon, Iron

*The color of the rods: white or yellow

*The length of the rod (1PCS): 400mm;

*Direct brush head: 100mm/150/200mm;

*Extendable length：
6Pcs rods:2.3m/7.6FEET
9Pcs rods:3.5m/11.5FEET
15Pcs rods:5.8m/19FEET
18Pcs rods:7m/23FEET

*【Safety】 Regular cleaning of cotton wool and other deposits in the pipeline can effectively increase the permeability of the pipeline and effectively prevent the risk of fire in the dryer. At the same time, the removal of deposits in the chimney can effectively prevent the lack of oxygen due to pipe blockage, which may eventually cause carbon monoxide to enter the room and endanger human health.

*【Save money】 One cleaning can save you all the costs of purchasing this product. Then, you can clean it at any time and save money every time.

*【Multi function】 This product can be used to clean fireplace pipes, chimney pipes, dryer pipes and other types of pipes. It is not recommended to clean flexible foil pipes, as the foil may tear and damage the pipes.

*【Simple】 With a cordless electric drill, rotate the rod clockwise and slowly clean it back and forth to easily and simply clean the pipeline.

How to choose the length of the rods：

*400mm-410mm-570mm-600mm long.

*The shorter the rod, the stiffer the rod.

* Hardness : 400mm long PA material rod> 570mm long PA material rod> 410mm long PP material rod> 600mm long PP material rod.

*Quality:400mm long PA material rod=570mm long PA material rod> 410mm long PP material rod= 600mm long PP material rod.

*Recommend：
I recommend 400mm long PA material rod（This link）and 570mm long PA material rod.
If you need a stronger rod, please purchase this linked product.

Better resilience:

Better materials. After bending, it has stronger recovery ability; it is not easy to break during high-strength work. It is suitable for scenes with complex usage conditions. For example: there are more than 3 elbows in the pipeline.

Ordinary product:

It is suitable for simple cleaning. High-intensity work is easy to break. If your usage scenario is very simple, you can choose the ordinary product in my store(Not this link).

Special note:

*If you receive the rod is white and hard. Don't worry, if you leave it exposed in the air for a period of time, it will absorb moisture in the air and become soft (it needs to last about a month). Because the white rod is just produced. The newly produced PA material is hard.

* The rod sold in this link is the rod (PA) of the material I recommend in the video with good quality!

*If you receive the rod, it feels a little hard.Please don't worry! The rod is made of PA, and the rod just produced is hard. It takes one month to absorb moisture in the air, and then it will become soft and more elastic.Please do not seal it and store it directly in the exposed air. It will absorb water in the air. Do not use water to water it, which may damage the rust protection of the screws.

*The rod made of PA material is of very good quality. Please don't worry!

*The color of the rod is white and yellow, which are sent randomly!

*The actual length of the rod is 400-415mm.

How to use：

1. Connect a sufficient number of rods as needed;

2. Install the brush head on the rod, (if you use a power drill, go ahead and install the hex rod);

3. When you start off go slow and clean out 2-3 feet at a time and pull the brush back towards you to bring all the dust junk back to or down to you. Going vertical to push the junk out won't work. However horizontal may work for you.

4. Get someone to do the drill work for you as you guide the rod and brush in and out of the pipe. As you go in pull it back and forth and then go in further. Once you have done about 3 feet pull it all back out to bring the junk back to you.

5. WEAR A MASK !! There will be dust everywhere. It will smell like fabric softener everywhere.

WARNING: Never force the brush/rod assembly through the duct! If it should become jammed, pull assembly away from constricted area a few inches (still rotating in a clockwise direction) then slowly push forward.

WARNING:Please do not bend the rod connecting the electric drill. If you have to bend, the bending angle should not exceed 30 °, and please turn it at a very, very slow speed. Otherwise, the product will be damaged by you!

WARNING: When the length of the rod is greater than the length you need to use. Please remove the extra rods. Otherwise, the redundant rods will be twisted together due to the rotation of the electric drill, and the rods will be damaged!

Specification:

*Please understand that there will be a little error in manual measurement.

*The products sold here are of better quality than other products sold in my shore. If you have high requirements for product quality, please choose this product. If you just use it simply, you can buy other products in my store, it will be cheaper.

*However, I still recommend this one. Better quality, better experience. Buy it and you won't regret it!

*The rod of this material has two colors and two kinds of screws. Their quality is the same. We will send randomly. Please understand that!

*If the gift is lost or not sent. Free supplementary sending can be provided. We do not accept refunds due to lost gifts.